here is my (short) video:
Zero-Air
I've used them in a Magnet XUL (
I like the rods. They are very light, but quite stiff.
They should work well as leading edges for SSUL kites under 230cm. Good combination with 2PT spreaders.
But when the winds pick up, the Zero-Airs are not so stiff anymore. Really only for the lightest conditions.
Krijn
Meganet always had the kitehouse-nose.
I make the horizontal stitch 15mm from the top of the nose.
Krijn
Ich denke die Nase soll auch nur 10X10cm sein, wie beim Standard, dort steht in der Einkaufsliste auch 15X10cm.
Du brauchst ja noch etwas von dem Material für den Scheuerschutz der OQS.
Gruß
Andreas
Denke Ich auch.
(i made the shopping list 
)
Alles anzeigenDanke Birger,
die Problematik ist mir bekannt. Deswegen bin ich hier auch schon lange auf der Suche.
Leider noch nicht fündig geworden.
Welche sind es an deinem EOL LW?
Könntest du mir welche, natürlich gegen Bezahlung, in 5 und 6 mm besorgen, zusenden oder mir den Tipp geben woher ich sie bekomme?
Gruß Marcus
experiment with these: http://www.drachenmarkt.de/epa…0Stopper%20...%22/Stopper
New movie
Matrix (S)UL, open source kite by Alberto Cavati and Mario di Biase (from Italy).
Winds were very light.
Plans available here: http://blog.giochivolanti.it/progetti/matrix/
Krijn
it is ready:
Krijn
I will post no further updates untill the kite is ready (and that may take a while because I still have to order a frame for it)
Krijn
I abandoned the chocolate brown.
Purples.
Picture soon.
brown and gold work together in my opinion:
two of my 100sixteens:
my valor:
(sorry for polluting this great thread, i'm just enthusiastic )
I did not try it yet with the Icarex in front of me. I'll check it soon.
I like brown Icarex. But every time I use it, I like it to be different. So no darkgrey-white-brown again.
Krijn
Maybe this one...
yes, sorry
and the nose? how far from the top is the horizontal stitching?
yes, this will be on top of my to-build-list
thanks Birger!
Nice one.
I'm working on a 106%.
Will probably finish it in time for Sunday. Tricksparty meeting in The Netherlands.
Krijn
90three XUL: 224cm, 118grams.
Sorry, not enough wind and/or energy to make lazies, tazmachines and longer fades... Maybe next time.
Krijn
Was tunnelt denn da ab 3:50 so krass, bringt L'Atelier schon wieder was neues?
proto from Heiko/Alphakites
